فارسی
English
This machine is used to wash crushed materials after primary crushing, where the materials contain sticky fine particles and exceed the permissible limit. This machine is designed with a high capacity to easily wash coarse materials.
Scrubber
Scrubber or the same salt mixture is used to wash and clean materials and raw materials that have a lot of mud and silt attached to them. The processes necessary to separate particles and sticky mud are as follows:
- Soft rubbing
- Impact and throwing particles
- Moving sand and gravel with the pressures resulting from weight in the water
Scrubbers are specific to river mixtures and after cleaning the particles, separation is performed in the above 3 methods. Scrubber operation After contaminated particles enter it, the particles are immersed by the amount of water inside the device and then their dust, mud and mud are cleaned with throwing and moving techniques. After that, these materials are poured onto a vibrating surface where screening is performed in this part. Excess water from the materials is separated, and the sand and gravel produced by the device are placed on the dry side and ready to be used.
Scrubber sand washing
One of the equipment and devices for washing and cleaning slag balls, sand and gravel are scrubbers. Dewatering of the materials entering the scrubber and their output and size are among the factors affecting the selection of the type of scrubber device. These devices are made based on the dimensions and standard input and output rates, which are available in two types of single-blade and double-blade and cast iron rollers. The scrubber in sand removes dust and dirt from the sand, and the most important reason for its use is to increase the quality of the sand.
The important features of this product include a rational structure, low power consumption, high and proper cleaning, high capacity, and minimal sand and sand waste.
The important features of this product include a rational structure, low power consumption, high and proper cleaning, high capacity, and minimal sand and sand waste.
Scruber Applications
Sand and sand processing in stone workshops and quarries is one of the most important applications of scrubbers.
- Cleaning sand and sand for and preparing them for use
- Separating products from mineral crushing workshops
- Dedusting products from stone mines
- Processing various minerals, especially sands
- The high safety of the device has led to its high use
One of the best features of these devices is that weather conditions and temperature do not affect their operation and they can be used in any condition.
- Places where scrubbers are used
- Stone mines
- Sand blasting workshops
- Power generation stations
- Crushing workshops
- Construction and preparation of cement dams
- Construction workshops
Reviews
There are no reviews yet.